Description

Dosatron D8RE2 dosing pump chemical injector unit.

Dosatron dosing pumps are installed directly in the water supply line and operate by using the flow of water as the power source – no electric power is needed. The water activates the Dosatron, which takes up the required percentage of concentrate directly from the container and injects it into the water.

Inside the Dosatron chemical injector unit, the concentrate is mixed with the water, and the water pressure forces the solution downstream. The dose of concentrate will be directly proportional to the volume of water entering the Dosatron, regardless of variations in flow or pressure, which may occur in the main line.

Dosatron D8RE2 Details:

• Dosing Rate – 0.2% to 2% (1:500 to 1:50)
• Water Flow Range – 500 to 8,000 Litres Per Hour
• Operating Water Pressure – 0.15 to 8 Bar (2 PSI to 110 PSI)
• Operating Water Temperature – 5°C to 40°C
• Connections – 1 1/2” BSP / NPT Male
• Packaged Weight – 5.5KG
• Packaged Dimensions – 670 x 225 x 205mm (L x W x H)
• Polypropylene pump casing

Package Contents:

• Dosatron
• Wall Bracket
• Suction Tube
• Owner’s Manual

Please contact us if you are unsure whether this will suit your application. We will email you after purchasing to ask what chemical you will be dosing with this pump to determine the seals you require. Please note that you may also have to upgrade to the white PVDF pump body version for an additional cost.